圓環鏈條如何減少磨損
圓環鏈條是由多個金屬圓環組成的，主要用于配合起重機械作業的重要起升裝置，由于載荷相對
-
新聞詳情
圓環鏈條是由多個金屬圓環組成的，主要用于配合起重機械作業的重要起升裝置，由于載荷相對較大，在長時間頻繁使用時，其磨損程度越來越大，當磨損量達到一定程度時，有必要對新提升機鏈條進行報廢和更換，下面介紹如何減少磨損，確保其長期使用。
密封應適當，不要太松或太緊，如果太緊會增加消耗，軸承和鏈條會加速磨損；如果太松，可能會有跳鏈；新舊ne提升機鏈條不應盡量混在一起，因?yàn)殒溨g的距離不同步，負荷有可能集中在一條鏈上，而鏈因不能完全承受負荷而斷裂。
做好潤滑工作，可產生一層油膜，在提高靈敏度的同時，保護提升機鏈條不受溫度的影響；調整長度，根據工作環境調整，如果太長，就需要削減工作量，嚴禁使用過載。仔細檢查鏈條的緊密性是否合適，是否與新圓環鏈條混合，是否做好潤滑工作，長度是否合適，是否超載，希望你在實際工作中多注意上述方面。
The ring chain is composed of several metal rings, which is mainly used for the important lifting device to cooperate with the lifting machinery operation. Due to the relatively large load, when it is used frequently for a long time, its wear degree is more and more large. When the wear amount reaches a certain degree, it is necessary to scrap and replace the new elevator chain. Here is how to reduce the wear and ensure its long-term use.
The sealing should be proper, not too loose or too tight. If it is too tight, it will increase consumption, and the bearing and chain will accelerate wear; if it is too loose, there may be chain jumping; the new and old ne elevator chains should not be mixed together as much as possible, because the distance between the chains is not synchronous, the load may be concentrated on one chain, and the chain can not fully bear the load and break.
Good lubrication can produce a layer of oil film, which can improve the sensitivity and protect the hoist chain from the influence of temperature; adjust the length according to the working environment, if it is too long, it needs to reduce the workload, and overload is strictly prohibited. Carefully check whether the tightness of the chain is appropriate, whether it is mixed with the new ring chain, whether it is well lubricated, whether the length is appropriate, and whether it is overloaded. I hope you pay more attention to the above aspects in the actual work.